Horizontale lintzaag / bomenzaag

This machine is designed for log wood, mainly in sawmills cutting logs in an amount of up to 20 m3/8 hours as well as companies requiring a very high accuracy and quality of the resulting raw material, e.g. oak, hornbeam, and beech, once sawn.
The hydraulic system mounted on a massive substructure made of a closed profile (200 mm x 120 mm x 6 mm) ensures a very high degree of operation stability to make the manoeuvring of large logs of up to 5 tonnes easier.
The wheels (filled type, diameter 600 mm) guiding the multi-groove belt of type PK (no thickened areas, resin and sawdust do not accumulate between the guidance and the belt) ensure the maximum operation life of the blade. In addition, they allow using a bimetallic blade with a width of up to 45 mm and a thickness of 1.27 mm or 1.40 mm. With such a blade in use, stable operation can be ensured. It considerably reduces wood waviness and allows obtaining precise sawing of up to 0.2 mm. The time between the intervals of blade sharpening is longer, compared with a typical blade (about an hour), and is about 3 hours if a bimetallic saw is used. It considerably improves the quality of cutting, particularly in the case of hard wood species. As the sawing machine TTP-600 Premium is provided with a stellite-edge blade (a special alloy based on cobalt and chromium), the sawing output is increased by 30 %, compared with typical blades (confirmed by many operation tests). Kerf is only 2.20 mm, and the tooth pitch is 25 mm, which allows applying much higher advance rates during the sawing process.

 

EQUIPMENT / TECHNICAL DATA:

Weight: 2450 kg
Main motor power: 11.0 kW (optionally 15 kW)
Power demand: 16.5 kW (full option)
Supply voltage: 380 V, 50 Hz
Vertical advance: electrical (motoreducer 0.55 kW)
Longitudinal advance of the saw head – stepless, inverter 0-40 lin.m./min (motoreducer 0.55 kW)
Advance of the tensioning roller: electric – motoreducer 0.12 kW
Guide wheels: 600 mm
Stationary control panel
Automatic barking machine
Water supply solenoid valve
Sawing measurement sensor ISP-10
Saw head clearance – 340/950 mm (optionally 1200 mm)
Blade width: 35 – 45 mm
Blade length: recommended bimetallic 4800 x 40 – 45 x 1.27 – 1.40
Kerf thickness: 1.5 – 2.2 mm
Complete hydraulics/ pressure x 1, squaring arms x 5, log loading x 1, levelling with log advance drive (forwards/backwards) x 1, turner x 1
Substructure of the sawing machine made of a closed section 200 mm x 120 mm x 6 mm.


OPTIONAL EQUIPMENT:

Operator seat
Substructure expandable to any length
Board/log scraper + double-sided advance drive
Electrical sawdust storage bin
Additional hydraulic tooling

 

OVERALL DIMENSIONS (basic model)

Length: – 10000 mm
Width: -2250 mm
Height: – 1900 mm

 

TECHNICAL DATA OF THE LOG TO BE WORKED (basic model)

Diameter of the log to be worked: 900 mm (optionally 1200 mm)
Weight of the log to be worked: up to 5 tonnes
Standard cutting length: 8800 mm

 

OUTPUT:

Machine output depends on the thickness of the log to be sawn and the required thickness of sawn wood – on average 2 m3/h depending on the blade used.

Typical blade: 4800 x 35 x 1.1 – approx. 10 m3/8h
Bimetallic blade: 4800 x 40 – 45 x 1.27 – 1.40 – approx. 15/8h
Stellite-edge blade: 4800 x 40 – 45 x 1.1 – tooth pitch 25 mm – approx. 20 m3/h

Sluit Menu
×
×

Winkelmand